RTI U2 Instruções de Operação descarregar pdf (Página 19)

It’s Under Control

CLEAR ALL

This selection displays a window that will allow you to erase the current

user program in the U2 Weather Resistant Remote Control. You will be

prompted to enter the current passcode. If the proper code is entered, the

entire user program in the U2 will be erased.

Warning! This will erase the entire user program in the U2. Once this is

done there is no way to restore it, except by reloading the program from

the Integration Designer™ software!

If you inadvertently select the CLEAR ALL function, simply press the ENTER

keypad button without entering the passcode and you will be returned to

the Control Panel page.

LOW BATTERY INDICATOR

If the U2 Weather Resistant Remote Control battery capacity is reduced to

approximately 25 percent, a low battery icon will appear in the lower left

side of the display:

At this point the U2 batteries should be replaced to maintain optimum

performance.

PROGRAMMING THE U2 WEATHER RESISTANT REMOTE CONTROL

The U2 Weather Resistant Remote Control is programmed using RTI’s

Integration Designer™ software. RTI dealers can download the software

from:

www.rticorp.com/dealers

A PC running Windows® 2000 or higher with a USB port is required. The

required USB cable is included with the RTI IR-PRO dealer kit.

Note: The U2 will not operate normally while connected to a PC’s USB

port. Make sure you disconnect it from the PC to navigate pages or

transmit commands. In addition, the U2 will not be able to sync with a PC’s

USB port while it is transmitting a command or running a macro.

CHAPTER 3 | OPERATION

Low Battery Icon

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

RTI U2 Instruções de Operação Página 19