RTI CP-450 Instruções de Operação descarregar pdf (Página 16)

CP-450

Cool Power

Audio Amplier

CHAPTER 3 | INSTALLATION AND OPERATION

CONNECTING THE 115VAC POWER CORD

The included AC power cord must be inserted into the AC input receptacle

on the CP-450. When the AC power cord is connected to a power source,

press the Power button to turn the CP-450 on and off.

IMPORTANT NOTICE FOR INTERNATIONAL DISTRIBUTORS

This product is shipped from RTI with AC voltage set to 115 Volts. The

voltage will have to be changed for certain international locations.

International distributors should take the following critical step.

• Ensure that the voltage switch is set properly for your location. The red

voltage switch on the rear of the product may need to be changed to the

230 Volt position.

*The red voltage switch should be left in the 115 Volt position if

used within the United States.

FREE STANDING

The CP-450 ships with four removable feet that allow the CP-450 to be

placed on a at surface. To maintain proper ventilation and cooling, do not

install the CP-450 on a at surface without the feet.

RACK MOUNT

The CP-450 can be mounted in a component rack using the included rack

mounting ears. Align the rack mounting ears with the screw holes located

on the sides of the CP-450 near the front. Fasten the rack ears to the

CP-450 using three screws (supplied). Remove feet before mounting in a

rack.

NOTE: To maintain proper ventilation, it is recommended that you leave a

rack space above and beneath the CP-450.

Foot

Rack Mounting Ears

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Sem comentários

RTI CP-450 Instruções de Operação Página 16